|
 |
|
JIH-350 L TYPE (Horizontal) 45 Double-blade Angular Sawing Machine
|
|
Feature
- When the foot panel switch is pressed the machine will perform material clamping and cutting automatically.
- Horizontal cutting and Saw moves on linear guideway, that assures accurate and large cutting..
- Cutting feed is driven by an air/hydraulic combination power for smooth feed speed.
- Two Vertical workpiece clamping design ensures extremely firm for any type of aluminum workpiece.
- Work piece clamping pressure is adjustable to eliminate material deformation problem.
- Automatic oil mist cooling for sawblades provides burr-free surface of cut, while extending sawblade life.
- Alternatively sawblades straight feed in horizontal direction allows large cutting width.
- Equipped with wear-resistant linear motion guides for accurate angle of cut.
- Cutting angle is easy to adjust.
- Gap between gauge and sawblade is adjustable no burr after sawing.
| MODEL |
JIH-350 L TYPE |
| Cutting Angle |
45° |
| Cutting width |
320 mm |
| Cutting Height |
70mm (For 90mm opt.) |
| Sawblade size |
14" x 1" x 2 pieces |
| Spindle |
3200 R.P.M |
| Motor |
2HP x 2 |
| Clamping system |
2 sets of vertical clamping |
| Worktable size |
500 x 320 mm |
| Worktable height |
840mm |
| Infeed/outfeed length (opt.) |
1-7M (opt) |
| Machine Dimension (LxWxH) |
1930 x 725 x 1300mm |
| Packing Dimension (LxWxH) |
2050 x 845 x 1500mm |
| Net / Gross weight |
650 / 780 kgs |
|
The machine performs a 45° degrees miter cut. Designed for high speed cutting of extrudes strip, door and window frames |
|
Horizontal cutting and saw move on linear guide way, that assure accurate and large cutting. |
|
Special mould for irregular frame (optional item) |
OPTIONAL EQUIPMENT
- Infeed and outfeed roller conveyor , dust collector, guard, Hydraulic feed system.
STANDARD EQUIPMENT
- 14" sawblade x 2pcs, replace sawblade tools.
|
| |
|
