HP150-60 - HYDRAULIC PUNCHING MACHINE

Features:

1. The punching machine is used for the wide-band 80-60mm U-shaped formwork of the Aluminum profile section and the punching of the side plate of the C-slot of 100*120 and above and the punching of the keel.
2. This machine can meet the rib height of 63.5mm and 65mm at the same time, with strong versatility and convenient interchangeability.
3. The whole machine body is heat treated to eliminate internal stress and has sufficient strength and rigidity. The machine hydraulic station adopts the domestic first-class brand, and the electrical components are all based on Schneider brand, and the performance is stable and durable.
4. The machine is hydraulically driven, and the four-bar linkage mechanism ensures that the slider and the punching needle are simultaneously undershoot.
5. The punching diameter is 16.5 mm, the hole distance is 50 mm, and 58 holes. Two end positioning devices.
6. With stroke adjustment bolt to adjust the effective working stroke, simple and convenient. The travel switch also has a stroke adjustment.
7. The punching needle is guided by the stripping plate to ensure that the punching needle is in the center of the core, the punching is free of burrs, and the service life of the punching needle is prolonged (the needle is not required to be replaced in 3 months).

Download Catalogue